| 10 IN STOCK (10 local - 0 remote) |
|
Ready to ship today Shipping within Ireland only € 4.99 -or spend €100.00 to get free shipping |
Thermal Grizzly Conductonaut Thermal Grease Paste - 1.0 Gram
| IN STOCK |
Thermal Grizzly Minus Pad 8 (Thermal Pad) 120x20x1.0mm
| IN STOCK |
Thermal Grizzly Kryonaut Thermal Grease Paste - 11.1 Grams
| IN STOCK |
Noctua NT-H1-10 Thermal Grease Paste - 10 g
| IN STOCK |
DeepCool Z10 Performance Thermal Paste Compound 5g Syringe
| IN STOCK |
Prolimatech Nano Aluminium Thermal Compound 30g
| IN STOCK |
Thermal Grizzly Minus Pad 8 (Thermal Pad) 30x30x1.5mm
| IN STOCK |
Arctic Silver AS5 Heat Sink Thermal Compound 3.5g
| IN STOCK |
Thermal Grizzly Conductonaut EXTREME Liquid Metal Thermal Paste - 1.0 Gram
| IN STOCK |
Thermal Grizzly KryoSheet Graphene Thermal Pad - 25 x 25 mm
| IN STOCK |
Startech Thermal Paste Compound - 20 Grams
| IN STOCK |
Thermal Grizzly Hydronaut Thermal Grease Paste - 26.0 Grams
| IN STOCK |
Akasa 455 High Performance Thermal Compound - 5g
| IN STOCK |
Prolimatech PK-3 Nano Aluminium Thermal Compound 30g
| IN STOCK |
Thermal Grizzly Carbonaut Thermal Pad 51x68x0.2mm
| IN STOCK |
With its improved composition, the ARCTIC MX-6 has a measurably lower thermal resistance than the MX-4. The basis for calculation is the temperature difference between the cooler base and the heat source (in C) in relation to the applied heat load (in W), which also results in the unit C/W. The higher the thermal resistance, the worse the heat can be transferred through the TIM layer. The higher the thermal resistance, the worse the heat can be transferred through the TIM layer. Thermal insulators, as an example, therefore always have a particularly high thermal resistance, while thermal interface materials usually have a particularly low one.
Optimal Consistency for Every Application
Depending on personal preference and area of application, a thinner or thicker thermal compound may be preferred. Excellent non-drying and non-bleeding properties ensure constant long-term performance. With ARCTIC thermal pastes you will find the optimal viscosity for your application.
Simply the Paste
The ARCTIC MX-6 is a carbon filler-based thermal paste and reaches its maximum performance without burn-in, directly after application and distribution. It achieves all of this without any reputed ingredients, such as expensive diamond dust or various precious metal particles. The silicone gel used as a carrier enables optimal distribution, which is achieved through even contact pressure, for example when mounting the heat sink.
Risk-Free Application
MX-6 is neither electrically conductive nor capacitive. This eliminates the risk of short circuits or discharges, which can cause serious damage to components if care is not taken. The thermal paste is also free of liquid metal components, which can often lead to discoloration, abrasion or corrosion damage to the radiator bottom.
Versatile Range of Applications
With its new composition, MX-6 is the suitable thermal compound for many application scenarios. Excellent non-drying and non-bleeding properties ensure consistent long-term performance. Its viscosity prevents leakage due to the Pump-Out Effect
| WEIGHT / VOLUME | 8g |
| OPERATING TEMPERATURE | -50~150 ℃ |
| COLOR | Grey |
| DENSITY | 2.6 g/cm³ |