Lindy 0.3m RJ45 S/FTP LSZH Cable, White by Lindy
- Be the first to review
- Item Number: FD3344617
- Part Number: 47320
|
Expected to ship within 10 days of order Shipping within Ireland only € 4.99 -or spend €100.00 to get free shipping |
Key Features
- Twisted Pair Patch Cable with RJ45 connectors
- Connector: Cat.6A / Cable: Cat.7 S/FTP (600Mhz)
- Integrated snagless connector for latch protection
- Gold plated pins for better conductivity and elimination of signal loss
See product description
Similar Products
-
Tripp Lite 3.3FT MTP/MPO APC to 8xLC UPC Singlemode Breakout Patch Cable - Yellow
IN STOCK
€ 226.27 (incl. VAT) -
Tripp Lite 10FT SC to ST Duplex Multimode 62.5/125 Fiber Patch Cable - Orange
IN STOCK
€ 15.48 (incl. VAT) -
C2G Cat5E 350MHz Snagless Unshielded (UTP) Patch Cable 0.3 Meter Networking Cable Blue
IN STOCK
€ 2.28 (incl. VAT) -
C2G 300ft Cat6 Snagless Solid Shielded Network Cable - Blue
IN STOCK
€ 220.28 (incl. VAT) -
Startech 10ft DB9 to DB25 Network Cable
IN STOCK
€ 5.53 (incl. VAT) -
C2G Shielded Snagless Cat6 Ethernet Network Cable - Yellow - 15ft
IN STOCK
€ 15.31 (incl. VAT) -
Tripp Lite 50FT RJ45 Male to RJ45 Male Cat5e 350MHz Outdoor-Rated Molded Patch Cable - Grey
IN STOCK
€ 42.19 (incl. VAT) -
C2G 10ft DB9 Null Network Cable - Beige
IN STOCK
€ 8.73 (incl. VAT) -
Startech 10ft DB9 Female to DB9 Male Network Cable
IN STOCK
€ 6.74 (incl. VAT) -
StarTech.com 10 Gigabit Shielded (SFTP) Cat6a RJ45 Patch Cable 0.5m – Gray
IN STOCK
€ 11.77 (incl. VAT) -
C2G Unshielded Snagless Slim Cat6 Ethernet Network Patch Cable - Gray - 5ft
IN STOCK
€ 6.37 (incl. VAT) -
C2G Unshielded Non-booted Cat6 Ethernet Network Cable - Gray - 15ft
IN STOCK
€ 7.68 (incl. VAT) -
Tripp Lite 15FT RJ45 Male to RJ45 Male Cat5e 350MHz Snagless Molded UTP Patch Cable - White
IN STOCK
€ 5.04 (incl. VAT) -
Tripp Lite 10FT RJ45 Male to RJ45 Male Cat6a 10G-Certified Snagless Shielded STP Network Patch Cable - Aqua
IN STOCK
€ 15.05 (incl. VAT) -
Lindy U/UTP Cat6 RJ45 Patch Cable 3m – White
IN STOCK
€ 5.57 (incl. VAT)
Details
Twisted Pair Patch Cable with RJ45 connectors
Connector: Cat.6A / Cable: Cat.7 S/FTP (600Mhz)
Integrated snagless connector for latch protection
Gold plated pins for better conductivity and elimination of signal loss
10 year warranty
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.
The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: "Cat.6A S/FTP patch cords with 600MHz raw cable".
Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
Available colours: Black, Blue, Grey, Red, White.
Connector: Cat.6A / Cable: Cat.7 S/FTP (600Mhz)
Integrated snagless connector for latch protection
Gold plated pins for better conductivity and elimination of signal loss
10 year warranty
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.
The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.
The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.
This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: "Cat.6A S/FTP patch cords with 600MHz raw cable".
Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
Available colours: Black, Blue, Grey, Red, White.
Specifications
| TYPE | Cat7 |
| LENGTH | 0.3 m |
| LEFT CONNECTOR | RJ-45 |
| RIGHT CONNECTOR | RJ-45 |
| CABLE SHIELDING | S/FTP (S-STP) |